LINUX下的网络配置命令是ifconfig类似于WINDOWS命令行中的ipconfig。可以使用ifconfig命令来配置并查看网络接口的配置情况。
例如:
(1) 配置eth0的IP地址, 同时激活该设备。
$ ifconfig eth0 192.168.1.10 netmask 255.255.255.0 up
(2) 配置eth0别名设备eth0:1的IP地址,并添加路由。
$ ifconfig eth0 192.168.1.3 $ route add –host 192.168.1.3 dev eth0:1
(3) 激活设备。
$ ifconfig eth0 up
(4) 禁用设备。
$ ifconfig eth0 down
(5) 查看指定的网络接口的配置。
$ ifconfig eth0
(6) 查看所有的网络接口配置。
$ ifconfig 2、 route
可以使用route命令来配置并查看内核路由表的配置情况。
例如:
(1) 添加到主机的路由。
$ route add –host 192.168.1.2 dev eth0:0 $ route add –host 10.20.30.148 gw 10.20.30.40
(2) 添加到网络的路由。
$ route add –net 10.20.30.40 netmask 255.255.255.248 eth0 $ route add –net 10.20.30.48 netmask 255.255.255.248 gw 10.20.30.41 $ route add –net 192.168.1.0/24 eth1
(3) 添加默认网关。
$ route add default gw 192.168.1.1
(4) 查看内核路由表的配置。
$ route
(5)删除路由。
$ route del –host 192.168.1.2 dev eth0:0 $ route del –host 10.20.30.148 gw 10.20.30.40 $ route del –net 10.20.30.40 netmask 255.255.255.248 eth0 $ route del –net 10.20.30.48 netmask 255.255.255.248 gw 10.20.30.41 $ route del –net 192.168.1.0/24 eth1 $ route del default gw 192.168.1.1
对于1和2两点可使用下面的语句实现:
Ifconfig eth0 172.16.19.71 netmask 255.255.255.0 Route 0.0.0.0 gw 172.16.19.254 Service network restart
3、 traceroute
可以使用traceroute命令显示数据包到达目的主机所经过的路由。
例如:
$ traceroute x
4、 ping
可以使用ping 命令来测试网络的连通性。
例如:
$ ping x $ ping –c 4 192.168.1.12
5、 netstat
可以使用netstat命令来显示网络状态信息。
例如:
(1) 显示网络接口状态信息。
$ netstat –i
(2) 显示所有监控中的服务器的Socket和正使用Socket的程序信息。
$ netstat –lpe
(3) 显示内核路由表信息。
$ netstat –r $ netstat –nr
(4) 显示TCP/UDP传输协议的连接状态。
$ netstat –t $ netstat –u
6、 hostname
可以使用hostname命令来更改主机名。例如;
$ hostname myhost
7、 arp
可以使用arp命令来配置并查看arp缓存。例如:
(1) 查看arp缓存。
$ arp
(2) 添加一个IP地址和MAC地址的对应记录。
$ arp –s 192.168.33.15 00:60:08:27:CE:B2
(3) 删除一个IP地址和MAC地址的对应缓存记录。
$ arp –d192.168.33.15 #Ubuntu命令行下的网络配置
编辑 /etc/network/interface文件如下
先添加
引用:
auto lo iface lo inet loopback auto eth0
如果是自动获取ip,添加
引用:
iface eth0 inet dhcp
如果是手动配置ip,添加
引用:
iface eth0 inet static address xxx.xxx.xxx.xxx netmask xxx.xxx.xxx.xxx network xxx.xxx.xxx.xxx boardcast xxx.xxx.xxx.xxx gateway xxx.xxx.xxx.xxx
获取更多建站运营运维新知!互联网创业、前沿技术......
最新评论
想要aarch64_generic架构的,用的是Rockchip RK3308 ARMv8 Cortex-A35
水淀粉vdfv
有其他下载方式么,网站上的点击下载后没有任何反应,或者直接发给我一下?83835079@qq.com
你好,我的型号ELECOM WRC-X3200GST3,ARMv8 Processor rev 4构架,CPU mediatek/mt7622,找了很久没有找到
我的也是这样。一直无法确认ARCH架构,或是不支持。一直没办法用。不知道怎么办了